Gear Up for What's Next. Ages 18-24? See if you're eligible for Prime for Young Adults

Cracked screens and dead instrument consoles can bring an otherwise smooth morning commute to a sudden halt. When your digital console gives up after heavy rain or handlebar impact, you lose critical insights like assist levels, real-time speed, and remaining battery voltage. Securing an accurate electric bike display replacement gets your ride back on track without the cost of an entirely new e-bike. Many riders dealing with unexpected electrical faults find that swapping an instrument panel takes only a few minutes with basic hex wrenches. Whether you ride a daily runabout or a specialized model like an electric bike with carrying case, matching your controller communication setup is the real secret to restoring power.

Communication standards govern whether your throttle, motor, and assist levels actually respond to handlebar commands. Based on product specifications and user feedback, most budget and aftermarket consoles rely on specific wiring sequences and matching firmware profiles. Selecting a compatible UART No. 2 protocol meter ensures your controller receives accurate input, avoiding frustrating error codes and non-responsive throttles. A proper replacement also restores your ability to tweak wheel diameter settings, view trip mileage, and monitor live system voltage on 24V to 60V electrical setups. Riders outfitting a practical compact electric bike with basket need hardware that handles wet roads while keeping vital performance metrics clearly visible in bright daylight.

1
Best Seller

Haytrix M5 Electric Bike LCD Display

Haytrix
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Haytrix M5 Electric Bike Display is a plug-and-play LCD meter designed for 24V to 60V e-bikes and scooters running the UART No. 2 protocol. Featuring an IP65 waterproof housing, clear ride metrics, and an integrated USB port, it is an ideal replacement screen for daily commuters and DIY builders.
Pros & Cons

Pros

  • Wide operating voltage compatibility spanning 24V to 60V systems
  • IP65 weather-sealed construction withstands wet commuting conditions
  • Straightforward handlebar installation fitting 22.2 mm to 31.8 mm bars using a standard hex key
  • High-contrast LCD panel displays essential metrics including speed, voltage, trip distance, and error codes
  • Integrated USB port provides convenient handlebar access for charging accessories

Cons

  • Strictly requires a controller configured for the UART No. 2 communication protocol
  • Incompatible with proprietary communication protocols, non-matching pin configurations, or non-M5 systems
  • Hex key required for bracket installation is not noted as included
Detailed Review

The Haytrix M5 Electric Bike Display is a replacement LCD meter engineered for e-bike commuters, scooter riders, and DIY electric bicycle builders. Designed specifically for setups running the UART No. 2 communication protocol across a 24V to 60V operating range, this unit serves riders who need to replace a damaged screen or upgrade an existing cockpit setup without modifying their controller wiring.

In terms of riding functionality, the high-contrast LCD panel organizes vital operational data into a clear, legible layout visible in direct daylight and during low-light commutes. The screen presents real-time speed, total odometer mileage, trip distance, live battery voltage, and system error code indicators. An integrated USB port also allows riders to access power right on the handlebars during everyday travel.

Hardware durability is reinforced by an IP65 waterproof rating, pairing a sealed outer housing with a waterproof connector to guard against rain, splashes, and airborne dust. The black casing is built to withstand routine outdoor exposure, so commuters do not need to detach the display when caught in drizzle or traversing wet streets.

Installation follows a direct plug-and-play approach via the standard 5-pin connector, eliminating the need to cut wires or solder pins when paired with an identically wired controller port. The adjustable mounting bracket accommodates standard handlebar diameters ranging from 22.2 mm to 31.8 mm, including 25.4 mm bars, and secures in minutes using a basic hex key.

While the unit delivers broad voltage versatility from 24V to 60V, compatibility is strictly tied to controllers programmed with the UART No. 2 protocol. Riders with proprietary communication protocols, differing pinouts, or non-M5 controller wiring will experience communication errors or total incompatibility.

For daily urban commuters, campus riders, and DIY mechanics needing a reliable replacement screen for a UART No. 2 system, the Haytrix M5 provides a straightforward, weather-sealed readout at a practical value. Verifying your e-bike controller protocol and pin count before purchasing ensures a trouble-free plug-and-ride installation.

Display & Controls

The Haytrix M5 display provides an easy-to-read high-contrast LCD panel configured to show essential ride parameters at a glance. Riders can monitor instantaneous speed, trip distance, overall odometer readings, and current battery voltage to keep track of system performance during daily travel.

The console also features an integrated error code indicator that signals electrical faults to streamline troubleshooting. An integrated USB port allows for convenient auxiliary device charging directly from your cockpit while commuting or running errands.

Accessory Compatibility

Compatibility for the Haytrix M5 display relies on matching electrical protocols, operating voltage, and physical mounting dimensions. This specific unit is built with a standard 5-pin connector designed for controllers that communicate via the UART No. 2 protocol.

The display supports electrical systems ranging from 24V to 60V without requiring external adapters or controller adjustments. The included mounting bracket fits common handlebar diameters including 22.2 mm, 25.4 mm, and 31.8 mm, making it suitable for a wide selection of commuter e-bikes, conversion kits, and electric scooters.

Weather Resistance

The Haytrix M5 meter features an IP65 environmental protection rating, providing dust-tight sealing and resistance to low-pressure water jets and rain splashes. The exterior housing and cable interface are engineered to keep moisture away from internal circuitry during typical outdoor riding.

While the unit is built to endure everyday drizzle, road spray, and dusty riding paths, it is not designed for prolonged water submersion or high-pressure power washing. Regular care and inspection of the sealed connector ensure consistent weather protection across all seasons.

2
Editor's Pick

Flylin S866 E-Bike LCD Display Control Panel

Flylin
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Flylin S866 E-Bike LCD Display is an affordable replacement control screen offering multi-voltage support from 24V to 60V and a backlit screen designed for 22mm handlebars. It is a solid choice for DIY e-bike builders and commuters needing a replacement meter compatible with No. 2 protocol controllers and 5-pin waterproof wiring.
Pros & Cons

Pros

  • Wide voltage compatibility spans 24V, 36V, 48V, 52V, and 60V systems via simple on-screen parameter adjustment
  • Integrated screen backlighting provides reliable readability in dark commuting environments
  • Sized for standard 22mm diameter handlebars for easy left-side mounting on many commuter setups
  • Durable build with a 5-core mini waterproof connector helps protect electrical contacts from the elements

Cons

  • Requires strict protocol matching; works with No. 2 and select 5S/J controllers, but is not compatible with KT systems
  • Short 225mm wiring lead may require an extension cable depending on controller location
  • Demands multimeter pinout verification prior to installation to prevent electrical damage
Detailed Review

The Flylin S866 Electric Bicycle LCD Display Meter is a dedicated aftermarket control panel designed for electric bicycles, daily commuter conversions, and DIY e-bike builds. It serves riders who need to replace a damaged or malfunctioning screen on an existing bike without purchasing an entirely new electronics suite. Designed to clamp directly onto standard handlebars, this compact digital console centralizes system status, backlighting, and operational adjustments into an accessible cockpit interface.

Functional versatility is one of the strongest attributes of the S866 display. The unit supports an adaptable voltage spectrum including 24V, 36V, 48V, 52V, and 60V electrical systems. While it comes pre-set to a 36V default, riders can adjust the voltage setting through parameter P03 to ensure accurate power readouts and consistent performance on higher or lower voltage builds. The digital LCD screen provides clear visual feedback on essential ride data, and the integrated backlight allows commuters to read the screen in low-light environments or during early morning rides.

In terms of physical construction, the display features a lightweight housing weighing under 0.1 pounds, keeping total cockpit weight negligible. The mounting clamp is engineered to fit standard 22mm diameter handlebars and is designed specifically for installation on the left-hand side of the handlebar assembly. For electrical integration, the unit features a 225mm waterproof cable terminated with a mini 5-pin connector, providing basic moisture resistance along the connection joint.

Proper setup requires technical attention to communication protocols and wiring configurations. The S866 is configured by default for controllers running communication protocol No. 2, though parameter P20 allows configuration for 5S/J protocol controllers. Before plugging the unit in, riders should use a multimeter on the female end of the controller plug to verify pin positions, confirming the battery supply port and identifying fluctuating signal lines under 5V to ensure electrical compatibility.

Buyers should account for realistic compatibility boundaries. This display is not universally compatible with all e-bikes, and it explicitly does not work with proprietary systems or KT protocol controllers. Additionally, the integrated 225mm wiring lead is relatively short, which may necessitate an extension cable on bikes where the main harness junction sits further down the downtube or frame.

For riders, commuters, and e-bike tinkerers who possess a compatible No. 2 or 5S/J protocol controller and standard 22mm bars, the Flylin S866 offers a practical, budget-friendly replacement. As long as line positions and protocol standards are verified before connecting, it delivers reliable digital monitoring and multi-voltage flexibility for everyday riding.

Display & Controls

The Flylin S866 features a large-format LCD screen designed to give riders an immediate visual overview of their electric bicycle's status. Integrated backlighting improves visibility during dusk, nighttime, and inclement-weather commutes, ensuring that speed and system metrics remain readable when ambient light is low.

System configuration is handled directly through on-screen parameter menus. Riders can adjust parameter P03 to set the unit to 24V, 36V, 48V, 52V, or 60V, matching the exact voltage of the installed battery pack. Furthermore, parameter P20 provides access to alternative protocol settings, allowing users to adapt the display to compatible 5S/J systems when required.

Accessory Compatibility

Compatibility for the Flylin S866 is strictly governed by controller communication protocol and wiring pinout. The unit operates on communication protocol No. 2 by default and supports 5S/J protocol through parameter P20, but it will not communicate with KT protocol controllers or proprietary closed-source e-bike drive systems.

Physical fitment requires a standard 22mm diameter handlebar, with the clamp shaped for left-hand orientation. The connection utilizes a mini 5-pin waterproof plug on a 225mm cord. Before final installation, measuring the female connector with a multimeter is necessary to ensure the battery power lead and low-voltage signal lines match the display pin layout perfectly.

3
Limited Time

Mcezdy M5C-2 Color LCD E-Bike Display

Mcezdy
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Mcezdy M5C-2 is a multi-voltage color LCD e-bike display featuring a Type-C charging port, IPX65 weather resistance, and programmable settings for controllers running UART No. 2 protocol. It is an ideal replacement or upgrade for commuters and DIY riders with compatible 24V, 36V, 48V, or 60V electric bike systems.
Pros & Cons

Pros

  • Broad electrical compatibility spanning 24V, 36V, 48V, and 60V systems
  • Convenient Type-C port for topping off phones or GPS devices on the road
  • Sturdy IPX65-rated build featuring tempered glass and a durable nylon mounting bracket
  • Easy-to-read color screen with walk-assist, cruise control, and voltage metrics

Cons

  • Operates strictly on UART No. 2 protocol and will not function with incompatible controller protocols
  • Requires verifying connector wiring pinout and 5-pin compatibility before installation
  • Lacks universal plug-and-play operation for proprietary factory e-bike systems
Detailed Review

The Mcezdy M5C-2 is an aftermarket color LCD electric bike display designed for DIY builders, daily commuters, and riders looking to replace a damaged screen or upgrade a dashboard on a compatible e-bike. Because electric bike electronics rely on specific communication standards, this display is engineered specifically for systems whose controllers run the UART No. 2 communication protocol.

In terms of everyday utility, the unit displays vital real-time riding data across a clear, vibrant color panel. Riders can monitor speed, odometer, trip distance, and live battery voltage across 24V, 36V, 48V, and 60V electrical setups. The unit also supports practical riding controls including cruise control and walk-assist mode, along with access to internal settings that permit fine-tuning parameters such as wheel diameter and speed limits.

Build quality centers on everyday durability for outdoor riding conditions. The display face is protected by tempered glass, enclosed within an ABS and polycarbonate housing, and anchored to the handlebars via a tough nylon bracket. The assembly carries an IPX65 waterproof rating, offering defense against dust and water spray during rainy commutes or damp rides.

Installation centers around a 5-pin connection and handlebar clamp. A notable practical benefit for commuters and recreational riders is the built-in Type-C output port, which allows riders to power a mounted smartphone or USB accessory directly from the bike electrical system. Configuring the display requires matching the correct system voltage and wheel size in the settings menu to ensure accurate speedometer and odometer readouts.

The primary limitation of this display is electronic compatibility. While it accommodates multiple voltages from 24V up to 60V, it exclusively communicates over the UART No. 2 protocol. E-bikes utilizing CAN bus protocols or differing UART revisions will not communicate properly, resulting in communication error codes or non-functional controls.

For riders seeking a sharp, readable color display with on-the-go USB charging and customizable settings, the Mcezdy M5C-2 represents a capable and practical upgrade. Buyers should confirm their existing controller specifically supports UART No. 2 and features a compatible 5-pin connector before purchasing.

Display & Controls

The Mcezdy M5C-2 color LCD screen presents vital riding metrics clearly, showing current speed, trip mileage, total odometer mileage, and real-time battery voltage. The colorful visual layout makes it easy to monitor battery reserves and performance metrics at a glance during daylight or nighttime riding.

In addition to standard cycling telemetry, the interface offers onboard control over practical riding functions including walk-assist mode and cruise control. Riders with compatible controllers can also enter the settings menu to adjust system parameters such as wheel diameter for precise speed tracking and configurable speed limit thresholds.

Accessory Compatibility

Compatibility for the Mcezdy M5C-2 is governed strictly by the controller communication protocol and wiring. The unit requires an e-bike controller that communicates via UART No. 2 protocol using a matching 5-pin interface. It will not communicate with systems operating on CAN bus or alternate UART protocol variants.

On the electrical side, the display supports multiple system voltages, adapting to 24V, 36V, 48V, and 60V battery architectures. Buyers should verify their controller wiring layout, pin assignments, and protocol type before purchase to prevent communication errors or setup failures.

Weather Resistance

Engineered for all-weather commuting, the M5C-2 features an IPX65 waterproof rating. This protection standard certifies that the internal electronics are sealed against dust ingress and low-pressure water spray from any direction, making it suitable for riding through wet weather and road spray.

The physical housing combines impact-resistant ABS and polycarbonate plastics with a scratch-resistant tempered glass faceplate. While the IPX65 rating protects against standard rainfall, the unit should not be cleaned with high-pressure washers or submerged in water.

4
Top Rated

Flylin M5 Electric Bike LCD Display

Flylin
9.7 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Flylin M5 LCD Display is a durable replacement cycling computer designed for e-bikes and e-scooters operating on 24V, 36V, 48V, or 60V electrical systems. It is best suited for commuters, DIY builders, and everyday cyclists whose controllers utilize communication protocol No. 2 and a matching 5-pin wiring sequence.
Pros & Cons

Pros

  • Compatible with 24V, 36V, 48V, and 60V electrical systems
  • Multi-fit mounting bracket accommodates 22.2mm, 25.4mm, and 31.8mm handlebars
  • Durable build featuring tempered glass and an aluminum alloy frame
  • Extensive 1800mm cable length simplifies wiring runs along e-bike frames

Cons

  • Strictly requires controller communication protocol No. 2 and matching 5-pin wire sequence
  • Lacks integrated headlight control functionality, which requires a 6-pin port
  • Defaults to 48V out of the box, requiring manual voltage reconfiguration for other battery setups
Detailed Review

The Flylin M5 LCD Display Panel is an aftermarket cycling computer and meter screen engineered for electric bicycles and electric scooters. It is aimed primarily at daily commuters, DIY builders, and recreational riders needing to replace a damaged control display or complete an electric conversion. Because e-bike display screens must match controller electronics, this unit is specifically built for systems running communication protocol No. 2.

Operational tracking is thorough and straightforward on the M5 screen. The LCD interface displays vital trip data, including current speed, trip mileage, total accumulated distance, and real-time system voltage. Beyond passive monitoring, the meter provides dedicated control features such as walk-assist mode and cruise control. Riders can also access internal settings to adjust key parameters like wheel diameter to guarantee accurate speedometer readings, or configure speed limit thresholds allowed by the controller.

Cockpit durability and physical integration are well addressed in the hardware design. The display features an ABS and polycarbonate housing protected by an aluminum alloy frame, a scratch-resistant tempered glass screen, and a tough nylon mounting clamp. Weighing roughly 0.088 pounds, it avoids adding noticeable bulk to the handlebars. The bracket includes sizing adapters to fit standard 22.2mm, 25.4mm, and 31.8mm handlebar diameters, making it adaptable to flat city bars, riser handlebars, and standard commuter stems.

Installation involves routing the included 1800mm SM-5Y 5-core cable down to your motor controller. The ample cable length makes it easy to run wiring cleanly on folding frames, commuter bikes, or extended utility layouts. However, successful setup requires confirming that your controller's pinout sequence matches the display's line order. Additionally, the factory default voltage is pre-set to 48V, so owners with 24V, 36V, or 60V battery systems must manually update the voltage parameter during initial configuration.

Buyers should understand the functional limitations before ordering. Because this model uses a 5-pin connection, it does not support an integrated headlight power switch, which requires a 6-pin interface. It is also not a universal display for every e-bike brand; if your controller uses a different communication protocol or alternate wire sequence, the meter will fail to communicate even if the connector physically plugs in.

For riders operating a confirmed Protocol No. 2 controller with matching 5-pin wiring, the Flylin M5 offers a sturdy, cost-effective replacement display with broad voltage support and customizable parameters. Taking a few moments to confirm controller specifications before buying ensures a smooth installation and dependable ride tracking for city commuting and weekend rides.

Display & Controls

The Flylin M5 cycling computer tracks critical everyday metrics, including current speed, single-trip distance, cumulative odometer mileage, and real-time battery voltage. It allows riders to adjust wheel diameter settings directly on screen, ensuring accurate speed calculation across different tire sizes.

Riders also gain access to practical assistance modes, including walk-assist for walking heavy bikes up ramps or curbs, and cruise control for maintaining a steady pace along clear commuter paths without constant input.

Accessory Compatibility

Compatibility for this display requires meeting three specific criteria: electrical voltage, communication protocol, and physical pin alignment. The screen operates across 24V, 36V, 48V, and 60V systems, though it comes set to 48V from the factory and must be adjusted manually for other voltages.

Your e-bike or scooter controller must utilize communication protocol No. 2 and match the 5-pin SM-5Y wiring sequence. Note that this 5-pin version cannot operate integrated bike headlights, which depend on a 6-pin configuration.

5

Mcezdy M5 E-Bike LCD Display: UART No. 2 Protocol

Mcezdy
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Mcezdy M5 E-Bike LCD Display is an aluminum-framed cycling computer engineered for 24V to 60V electric bike controllers running the UART No. 2 communication protocol. It is an ideal replacement or upgrade for commuters and DIY builders who need clear trip tracking, voltage readout, and customizable bike parameters with a compatible 5-pin connection.
Pros & Cons

Pros

  • Wide 24V-60V operational voltage range supports a broad variety of common e-bike battery setups
  • Durable aluminum alloy frame and tempered glass display resist daily scuffs, trail vibration, and weathering
  • Generous 1800mm cable length ensures hassle-free reach to controller enclosures on compact or larger frames
  • Multi-size handlebar bracket supports standard 22.2mm, 25.4mm, and 31.8mm bars out of the box

Cons

  • Strictly restricted to UART No. 2 protocol controllers and will not function with CAN bus or other UART formats
  • Requires the controller to use a matching 5-pin connector layout for signal and power delivery
  • Lacks a formal IP waterproof code rating in the listed specifications despite the waterproof connector
Detailed Review

The Mcezdy M5 E-Bike Display is an aftermarket LCD cycling computer tailored for electric bike riders who need a replacement screen or an updated control interface for controllers running the UART No. 2 communication protocol. It suits DIY e-bike builders, commuters, and recreational riders with multi-voltage electric setups ranging from 24V up to 60V who want clear access to essential speed metrics, trip telemetry, and system parameter adjustments.

Rider telemetry on this unit focuses on real-time tracking, showing current speed, single-trip distance, cumulative odometer mileage, and battery voltage levels. Beyond passive monitoring, the display provides functional riding aids such as walk-assist mode to help move a heavy bike on foot, cruise control activation for extended flat commutes, and the ability to modify critical bike parameters like wheel diameter calibration and maximum speed limits directly from the interface.

Construction quality highlights materials designed to survive urban commuting and off-pavement riding vibration. The M5 display integrates an aluminum alloy protective outer frame around a sturdy ABS and polycarbonate housing. Its viewing window utilizes tempered glass to resist scratches and abrasions, while the mounting assembly uses a durable nylon bracket engineered to stay firm across varied road conditions.

Installation is flexible across most standard bike cockpits thanks to mounting hardware that adapts to 22.2mm, 25.4mm, and 31.8mm handlebar diameters. Wiring reach is also generous, featuring an exposed cable length of 1800mm terminated with a JL-F-Z509AG 5-pin waterproof quick-disconnect plug, giving riders plenty of slack to route cleanly through the frame down to the controller compartment.

Compatibility is the primary limitation to keep in mind before purchasing. This display requires an exact match with the controller communication protocol and wiring pinout; it only operates on controllers using the UART No. 2 standard and will not communicate with CAN bus controllers or systems utilizing alternative UART revisions, even if the physical connector appears similar.

For riders who have verified that their e-bike controller communicates via UART No. 2 and accepts a standard 5-pin plug, the Mcezdy M5 provides a durable, clearly structured cycling computer. Its wide multi-voltage compatibility and robust metal-reinforced housing make it a dependable option for replacing broken screens or finalizing custom e-bike builds.

Display & Controls

The Mcezdy M5 LCD cycling computer consolidates essential riding data into an organized layout that lets commuters and trail riders check their status without distraction. The interface displays instantaneous speed, trip mileage, total odometer tracking, and real-time battery voltage to help manage range expectations on longer rides.

Control options extend beyond passive data display by enabling active ride modes directly from the handlebars. Riders can engage a walk-assist mode to maneuver heavy electric bikes up ramps or curbs, activate cruise control for steady cruising, and access internal settings menus to adjust wheel diameter and program speed restrictions according to local riding preferences.

Accessory Compatibility

Compatibility for the Mcezdy M5 hinges entirely on controller communication protocols and physical connector pinouts. This unit operates exclusively with motor controllers programmed for the UART No. 2 protocol; it is incompatible with CAN bus systems or other proprietary UART protocol variations, regardless of physical cable similarities.

Electrically, the unit accommodates battery setups spanning 24V, 36V, 48V, and 60V without requiring external voltage converters. Mechanically, the included nylon bracket fits 22.2mm, 25.4mm, and 31.8mm handlebar diameters, and the 1800mm harness connects via a JL-F-Z509AG 5-pin waterproof plug, requiring verification against your current controller wiring before installation.

6

Lausixy M5 LCD Display Panel for E-Bikes

Lausixy
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The Lausixy M5 LCD Display Panel is a multi-voltage replacement screen supporting 24V, 36V, 48V, and 60V systems using communication Protocol No. 2. It offers an affordable, weather-resistant solution for commuters and DIY riders needing to restore speed, mileage, and battery tracking on compatible e-bikes and scooters.
Pros & Cons

Pros

  • Broad multi-voltage flexibility compatible with 24V, 36V, 48V, and 60V systems
  • Includes mounting shims to fit both 31.8mm and 22.2mm handlebar diameters
  • Integrated backlight improves display readability in dark and low-light environments
  • Durable ABS plastic enclosure provides splash resistance against wet riding conditions

Cons

  • Strictly requires Protocol No. 2 and a matching 5-pin connector to communicate with the motor controller
  • Does not include supplementary features such as a USB charging port or mobile app synchronization
  • Requires careful verification of your existing controller wiring pinout before installation
Detailed Review

The Lausixy M5 LCD Display Panel is an aftermarket replacement screen and digital monitor engineered for electric bicycles and electric scooters. Designed primarily for DIY builders, urban commuters, and repair-focused riders, this unit provides a direct swap for damaged, cracked, or sun-faded M5 screens. It supports multiple nominal system voltages, making it a versatile option for budget commuters looking to get their ride back on the road without purchasing an entirely new electronics kit.

Functionally, this display delivers primary ride metrics directly to your cockpit through a clean LCD layout. Riders can monitor real-time speed, view accumulated odometer and trip distances, and check battery capacity at a glance. The integrated backlight ensures clear readability during dawn, dusk, or night rides. Because the firmware supports 24V, 36V, 48V, and 60V configurations, it accommodates the majority of common commuter and utility e-bike battery systems.

The physical build uses wear-resistant ABS plastic engineered to absorb routine street vibrations and resist UV breakdown from outdoor exposure. Sealed seams and reinforced wiring entry points provide splash and rain protection, helping the unit handle wet-weather commutes without short-circuiting. For handlebar placement, the primary bracket fits 31.8mm bars and comes with adapter spacers to fit standard 22.2mm flat handlebars found on most electric scooters and commuter bikes.

Installation is relatively straightforward on a mechanical level, but electrical matching is critical. This unit relies on communication Protocol No. 2 and uses a 5-pin connector. It will not communicate properly with controllers running alternative communication protocols, proprietary brand software, or mismatched pinouts. Riders must verify their existing controller protocol and connector orientation before attempting replacement.

This display functions purely as an informational interface and will not modify motor power limits, increase top assisted speed, or expand battery range. It lacks auxiliary conveniences like a 5V USB output for phone charging or Bluetooth connectivity. Additionally, while the ABS housing resists rain and road spray, it is not rated for pressurized water cleaning or complete submersion.

For owners of e-bikes or scooters equipped with a damaged display and a Protocol No. 2 controller, the Lausixy M5 LCD Display Panel serves as an accessible, cost-effective replacement. When paired with a matching 5-pin system, it delivers clear telemetry, dependable weather resistance, and simple handlebar mounting to keep your daily commute fully operational.

Display & Controls

The Lausixy M5 screen centralizes vital riding metrics on a high-contrast digital display. Commuters can view real-time speedometer readings, track specific trip distances, monitor lifetime odometer mileage, and gauge remaining battery voltage levels directly from the handlebars.

An integrated backlight provides screen illumination for early morning or night riding, ensuring visibility across shifting ambient light conditions. The user interface allows system voltage adjustments across 24V, 36V, 48V, and 60V settings to ensure accurate battery gauge calculations on compatible setups.

Accessory Compatibility

Compatibility for this display depends strictly on electrical communication protocols and wiring connectors. The Lausixy M5 utilizes communication Protocol No. 2 and features a dedicated 5-pin connector. It will not function on controllers running different communication standards or proprietary manufacturer firmware.

On the hardware side, the display includes a 31.8mm clamp ring alongside an adapter shim for 22.2mm diameters. This allows secure mounting to standard flat bars, commuter handlebars, and typical electric scooter cockpits without requiring additional aftermarket brackets.

Weather Resistance & Build

The exterior housing is constructed from impact-resistant ABS plastic that withstands daily outdoor use, road vibration, and UV exposure. The sealed perimeter protects internal circuits from rain, road splash, and damp morning conditions during daily transit.

While the enclosure offers dependable water resistance for standard outdoor riding, it is not designed for prolonged water submersion or high-pressure hose washing. Routine maintenance requires only wiping the screen and bracket down with a damp microfiber cloth.

7

YOLUFER E-Bike LCD Display Control Panel

YOLUFER
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The YOLUFER LCD Electric Bike Display is a multi-voltage replacement screen supporting 24V, 36V, 48V, and 60V systems on standard 22.2mm and 31.8mm handlebars. It is best suited for commuters, scooter owners, and DIY e-bike riders looking to replace a damaged 5-pin display with essential speed, battery, and distance readouts.
Pros & Cons

Pros

  • Broad operational voltage range covers 24V through 60V battery configurations
  • Includes mounting provisions for both common 22.2mm and 31.8mm handlebar diameters
  • Clear, high-contrast screen layout ensures quick checks of speed, distance, and battery status
  • Weather-resistant construction handles routine moisture and exposure during daily commutes

Cons

  • A matching 5-pin plug and voltage do not guarantee communication protocol compatibility with every controller
  • No specific numerical IP waterproof rating is provided in the manufacturer data
Detailed Review

The YOLUFER LCD Electric Bike Display serves as a versatile replacement screen and control panel designed for electric bikes and e-scooters. It is tailored for city commuters, campus riders, and DIY electric bicycle builders who need to replace a cracked, sun-damaged, or unresponsive stock cycling computer. By supporting multiple operating voltages and handlebar clamp sizes, it offers an accessible path to restoring dashboard visibility without replacing the entire powertrain.

Operational versatility is the primary benefit of this replacement screen, featuring wide support across 24V, 36V, 48V, and 60V electrical systems. The high-definition LCD screen provides clear readouts for real-time traveling speed, remaining battery capacity, and total or trip distance. Having vital system metrics readily readable helps riders manage their battery reserves effectively on daily work commutes or weekend recreational rides.

Hardware design focuses on broad physical adaptability. The mounting assembly accommodates both standard 22.2mm bars commonly found on flat-bar commuter bikes and scooters, as well as modern 31.8mm oversized handlebars. The display is housed in a clean black casing designed to resist outdoor weather conditions, while the 5-pin wiring harness provides a firm, reliable physical connection to the e-bike wiring harness.

Installation and daily upkeep are straightforward for riders comfortable with basic bicycle cockpit adjustments. Swapping the screen requires loosening the clamp, aligning the unit for an optimal viewing angle, and connecting the 5-pin terminal to the controller lead. Routine care involves keeping the screen surface free of grit with a damp microfiber cloth and ensuring the wiring connector remains fully seated and protected from direct high-pressure hose spray.

Potential buyers should be aware of a fundamental electrical limitation common to aftermarket displays: physical fit and voltage matching do not ensure protocol compatibility. While the screen supports 24V through 60V setups and utilizes a standard 5-pin connection, the display must share the same digital communication protocol as your specific controller to operate correctly. Additionally, while the shell is weather-resistant, the manufacturer does not specify an IP water-ingress rating, so extreme rain or pressure washing should be avoided.

For riders dealing with an inoperative stock panel on a compatible 5-pin electric bike or scooter, the YOLUFER LCD Display is an economical and functional replacement. Always verify your current controller wiring pinout and communication protocol prior to purchase to confirm seamless system communication.

Display & Controls

The high-definition LCD panel delivers high contrast for quick viewing while navigating city streets. Essential data fields include current speed, remaining battery power bars, and distance tracking, giving riders clear feedback on system state at a glance.

Mounted centrally or adjacent to the handlebar grip, the screen is engineered to keep critical information in the rider view without obstructing access to shifters, mechanical brake levers, or attached accessories like phone mounts.

Accessory Compatibility

Physical handlebar mounting is verified for 22.2mm and 31.8mm diameters, covering the vast majority of commuter e-bikes, folding bikes, and electric scooters on the market today.

Electrical compatibility requires both a matching 24V, 36V, 48V, or 60V power supply and a compatible 5-pin communication protocol between the screen and your motor controller. Matching connector shape alone is not sufficient; checking your controller model specifications is essential for proper function.

Frequently Asked Questions About E-Bike Displays

How do you confirm protocol compatibility before an electric bike display replacement?

Check your motor controller label or consult your manufacturer documentation to verify the communication protocol and pin sequence. Many common units require the UART No. 2 protocol, meaning a meter using KT or alternate communication standards will not communicate, even if the mini 5-pin connector fits physically. Testing line voltage with a multimeter confirms power supply and fluctuating signal lines under 5V before final connection.

Can a single 5-pin display replacement operate across multiple battery voltages?

Yes, many standard replacement panels support 24V, 36V, 48V, and 60V electrical setups through onboard parameter menus. Most units ship with a default 36V or 48V factory baseline, so you must enter the setup screen (often setting P03) to select your actual battery pack voltage. Failing to adjust this setting causes inaccurate battery gauges and false low-voltage cutoffs during rides.

Why does a newly installed e-bike speedometer show incorrect travel speed?

An incorrect wheel diameter setting in the display programming is almost always the cause of speed errors. Meter displays calculate road speed by combining wheel revolutions with programmed rim and tire measurements. Adjusting parameter settings to reflect your exact tire size corrects odometer accumulation and real-time speed readouts instantly.

Are aftermarket e-bike replacement displays fully waterproof against rain?

Most units feature water-resistant ratings like IP65 rather than total waterproofing against submersion. Sealed housings, ABS shells, and molded rubber buttons resist road spray and moderate rain during daily travel. Commuters who ride a waterproof electric bike for wet conditions can rely on these sealed units, but using pressurized hose water during cleaning should always be avoided.

Does a 5-pin electric bike display replacement operate integrated headlight systems?

No, standard 5-pin connectors typically lack the dedicated wiring line needed to trigger external lighting systems. Operating headlights directly through your handlebar display switch usually requires a 6-pin wiring harness and compatible controller interface. A 5-pin meter handles power delivery, ground, communication transmit, communication receive, and walk-assist signals exclusively.